PREFACE
About CORBA, please have a look at http://en.wikipedia.org/wiki/Corba.
omniORB is one of the CORBA implementations, please have a look at http://omniorb.sourceforge.net/.
About Qt, please have a look at http://en.wikipedia.org/wiki/Qt_%28toolkit%29.
And there is one add-on, QtCorba, http://trolltech.com/products/qt/addon/solutions/catalog/4/Utilities/qtcorba/, which is for the integration Qt 4.x with ACE/TAO or MICO(another two CORBA implementations). Then main concept in QtCorba is to convert ACE/TAO or MICO events into Qt event, just because they need the main thread to run their own event loop. QtCorba is not open source(it’s commercial product).
I had inquried the omniORB mailing list how to integrate omniORB with Qt 4.x. The core developer of omniORB, Duncan Grisby, gave me a reply on it.
http://www.omniorb-support.com/pipermail/omniorb-list/2008-February/029227.html
omniORB doesn’t have an application-hookable event loop like Mico. it
always uses its own threads to dispatch CORBA calls. You can just use
the main thread to service Qt’s event loop and it will work fine.
Then I tried some code, it works fine.
1. Install omniORB 4.1.1 and run the examples
I am using openSUSE 10.3, gcc 4.2.1 on 32bit PC.
Download: omniORB-4.1.1.tar.gz
http://sourceforge.net/project/showfiles.php?group_id=51138
There are four parts, BUILD omniORB, RUN omniORB EXAMPLES, BUILD Qt, RUN Qt&omniORB EXAMPLES in this article.
BUILD omniORB
cd ~/tmp
mkdir build
tar zxvf omniORB-4.1.1.tar.gz
cd omniORB-4.1.1
./configure -prefix /user
make
sudo make install
Build examples:
cd ~/tmp/omniORB-4.1.1
cd src/examples/echo
make
Please read Chapter 2 in doc/omniORB.pdf at first.
RUN omniORB EXAMPLES
(1) eg1 is an example which creates a corba object and invokes the method of it in same code.
cd ~/tmp/omniORB-4.1.1
cd src/examples/echo
./eg1
The result should be:
I said, “Hello!”.
The Echo object replied, “Hello!”.
(2) eg2_impl is the server, eg2_clt is the client, they are based on IOR, not need to run omniNames.
In terminal 1, run the server:
cd ~/tmp/omniORB-4.1.1
cd src/examples/echo
./eg2_impl
IOR:010000000d00000049444c3a4563686f3a312e3000000000010000000000000068000000010102000f0000003133342e33322e3138352e3232300000f96600000e000000fe23aab24700000562000000000000000200000000000000080000000100000000545441010000001c00000001000000010001000100000001000105090101000100000009010100
In terminal 2, run the client:
cd ~/tmp/omniORB-4.1.1
cd src/examples/echo
./eg2_clt IOR:010000000d00000049444c3a4563686f3a312e3000000000010000000000000068000000010102000f0000003133342e33322e3138352e3232300000f96600000e000000fe23aab24700000562000000000000000200000000000000080000000100000000545441010000001c00000001000000010001000100000001000105090101000100000009010100
Yeap, you should use the IOR:01000…. string as the parameter of client side.
The output of server side:
Upcall Hello!
Upcall Hello!
Upcall Hello!
Upcall Hello!
Upcall Hello!
Upcall Hello!
Upcall Hello!
Upcall Hello!
Upcall Hello!
Upcall Hello!
The output of client side:
I said, “Hello!”.
The Echo object replied, “Hello!”.
I said, “Hello!”.
The Echo object replied, “Hello!”.
I said, “Hello!”.
The Echo object replied, “Hello!”.
I said, “Hello!”.
The Echo object replied, “Hello!”.
I said, “Hello!”.
The Echo object replied, “Hello!”.
I said, “Hello!”.
The Echo object replied, “Hello!”.
I said, “Hello!”.
The Echo object replied, “Hello!”.
I said, “Hello!”.
The Echo object replied, “Hello!”.
I said, “Hello!”.
The Echo object replied, “Hello!”.
I said, “Hello!”.
The Echo object replied, “Hello!”.
And you also can separately run server and client on different machines.
(3) eg3_impl is the server, eg3_clt is the client, they are based on omniNames(the nameing service).
Now we need do something about config file. There is a sample.cfg in ~/tmp/omniORB-4.1.1.
We create a server3.cfg and a client3.cfg in ~/tmp/cfg/.
diff -c sample.cfg server3.cfg
*** sample.cfg 2008-02-13 09:34:57.000000000 +0100
— server3.cfg 2008-02-13 09:54:42.000000000 +0100
***************
*** 329,334 ****
— 329,335 —-
# corbaname URI:
#
# InitRef = NameService=corbaname::my.host.name
+ InitRef = NameService=corbaname::localhost
#
#
# Specify the Trading service and the interface repository using corbaloc:
diff -c sample.cfg client3.cfg
*** sample.cfg 2008-02-13 09:34:57.000000000 +0100
— client3.cfg 2008-02-12 14:27:59.000000000 +0100
***************
*** 329,334 ****
— 329,335 —-
# corbaname URI:
#
# InitRef = NameService=corbaname::my.host.name
+ InitRef = NameService=corbaname::localhost
#
#
# Specify the Trading service and the interface repository using corbaloc:
We create a log directory for omniNames.
cd ~/tmp
mkdir log
In terminal 1, run the omniNames:
export OMNIORB_CONFIG=~/tmp/cfg/server3.cfg
omniNames -start -log ~/tmp/log
(This is for first time to run.)
omniName -log ~/tmp/log
(This is for not first time to run.)
In terminal 2, run the server:
cd ~/tmp/omniORB-4.1.1
cd src/examples/echo
unset OMNIORB_CONFIG
./eg3_impl
In terminal 3, run the client:
cd ~/tmp/omniORB-4.1.1
cd src/examples/echo
export OMNIORB_CONFIG=~/tmp/cfg/client3.cfg
./eg3_clt
The output of client side is same as previous case.
If the Nameing Service(omniNames) is not running, then you will get:
./eg3_clt
Caught system exception TRANSIENT — unable to contact the server.
And you also can separately run server and client on different machines.
Please make sure to edit the config file correctly, for example:
You can replace “localhost” with your server’s ip or domain name in server3.cfg and client3.cfg.
(4) The applications are same with previous, but the config file are different, follow an old way.
diff -c sample.cfg server4.cfg
*** sample.cfg 2008-02-13 10:07:09.000000000 +0100
— server4.cfg 2008-02-13 10:23:49.000000000 +0100
***************
*** 329,334 ****
— 329,335 —-
# corbaname URI:
#
# InitRef = NameService=corbaname::my.host.name
+ InitRef = NameService=corbaname::192.168.249.130
#
#
# Specify the Trading service and the interface repository using corbaloc:
***************
*** 1041,1044 ****
# bootstrap agent protocol. This enables interoperability between omniORB
# servers and Sun’s javaIDL clients. When this option is enabled, an
# omniORB server will respond to a bootstrap agent request.
! supportBootstrapAgent = 0
— 1042,1045 —-
# bootstrap agent protocol. This enables interoperability between omniORB
# servers and Sun’s javaIDL clients. When this option is enabled, an
# omniORB server will respond to a bootstrap agent request.
! supportBootstrapAgent = 1
diff -c sample.cfg client4.cfg
*** sample.cfg 2008-02-13 09:34:57.000000000 +0100
— client4.cfg 2008-02-13 10:24:48.000000000 +0100
***************
*** 1042,1044 ****
— 1042,1046 —-
# servers and Sun’s javaIDL clients. When this option is enabled, an
# omniORB server will respond to a bootstrap agent request.
supportBootstrapAgent = 0
+ bootstrapAgentHostname = 192.168.249.130
+ bootstrapAgentPort = 2809
In terminal 1, run the omniNames:
export OMNIORB_CONFIG=~/tmp/cfg/server4.cfg
omniNames -start -log ~/tmp/log
(This is for first time to run.)
omniName -log ~/tmp/log
(This is for not first time to run.)
In terminal 2, run the server:
cd ~/tmp/omniORB-4.1.1
cd src/examples/echo
unset OMNIORB_CONFIG
./eg3_impl
In terminal 3, run the client:
cd ~/tmp/omniORB-4.1.1
cd src/examples/echo
export OMNIORB_CONFIG=~/tmp/cfg/client4.cfg
./eg3_clt
The output of client side is same as previous case.
BUILD Qt
4.3.3 X11(Open Source or Commercial)
Ignore.
RUN Qt&omniORB EXAMPLES
Based on Duncan Grisby’s reply, first I tried to run the omniORB code in a QThread, it works fine. Then I just run the omniORB code in my GUI code, it also works fine.
(1) eg1.tar.gz, just like the first example in echo.
cd ~/tmp
tar zxvf eg1.tar.gz
cd eg1
ls
echo.cpp echo.h echo.idl eg1.pro main.cpp omniorbthread.cpp omniorbthread.h
echo.h and echo.cpp are generated from echo.idl with omniidl.
omniidl -bcxx echo.idl
It will generate echo.hh and echoSK.cc.
mv echo.hh echo.h
mv echoSK.cc echo.cpp
Then you need to modify the echo.cpp to include “echo.h”, not “echo.hh”.
qmake
make
unset OMNIORB_CONFIG
./eg1
I said, “Hello!”.
The Echo object replied, “Hello!”.
OmniORBThread is over!
(2) eg3.tar.gz, just like the third example in echo.
cd ~/tmp
tar zxvf eg3.tar.gz
cd eg3
qmake
make
ls
client echo.cpp echo.h echo.idl eg3.pro guiclient guiclient2 server
server is a console server application which runs the omniORB code in a thread.
client is a console client application which runs the omniORB code in a thread.
guiclient is a gui client application which runs the omniORB code in a thread.
guiclient2 is a gui client application which runs the omniORB code in main thread.
You can use server3.cfg/client3.cfg or server4.cfg/client4.cfg to run these examples application.